Audiophile Listening Room Acoustics
I.N. is a medical doctor in the Philadephia metro area.
The client approached Acoustic Frontiers to create a high performance listening room in the home he had just purchased.
The initial plan was to remove the existing floor-to-ceiling cabinets at the front of the room and do a minor remodel in order to fill in some of the openings in the side walls and create a more balanced left / right environments for the speaker system.
The client's equipment included Avantgarde Duo Omega G2 speakers, Lamm ML2 amplifiers, a Pass Labs XVR1 crossover and JL Audio Fathom F112 subwoofers.
The room needed to function as a high performance stereo listening room as well as a basic home theater with retractable projection screen and a separate set of speakers.
[caption id="attachment_4350" align="aligncenter" width="480"]
Move in day! Here's the space the client wanted us to transform into an audiophile listening room.[/caption]
Acoustic Frontiers Solutions
This audiophile listening room acoustics project included:
During the remodel, we advised on best location for the opening from the hallway into the room, and also on wall construction. Since the client was aiming for the best results possible in the space, we recommended that he insulate all wall and ceiling cavities and replace existing gypsum board with factory damped drywall. Undamped drywall and uninsulated wall / ceiling cavities resonate strongly at one frequency and multiples thereof, damaging the quality of the audio reproduction - after the bass note from the sound system stops, the walls / ceiling continues to resonate, muddying the sound and reducing articulation and impact. To learn more about damped construction techniques, see our bass optimization blog post
Speaker / sub / listener position options were modeled, and the best option (in terms of flatness of frequency response) was chosen as the basis for the acoustic treatment design.
[caption id="attachment_4338" align="aligncenter" width="750"]
Speaker / listener position optimization results.[/caption]
The modeling revealed that there would be frequency response issues caused by room mode resonances around 27Hz and 70Hz. The 70Hz issue is just below the crossover point of the subs and main speakers, and we could not rely on equalization to fix it since the client did not want to add any EQ to the main left / right signal path, only the subs. 70Hz is also a frequency that is addressable using high quality bass trapping. The 27Hz resonance we would aim to correct using the 'ARO' EQ built into the JL Audio Fathom subwoofers.
Optimal locations for pressure-based bass trapping were identified as top of the front wall using our advanced low frequency modeling techniques.
[caption id="attachment_4339" align="aligncenter" width="592"]
Computer based modeling shows areas of high sound pressure (yellow) and low (blue), allowing best locations for tuned bass trapping to be identified. This simulation was completed at top-of-wall height (additional simulations were run for middle-of-wall and bottom-of-wall).[/caption]
Our audiophile listening room acoustics design included five large tuned bass traps on the front wall and a custom minimally absorptive side wall diffuser.
[caption id="attachment_4341" align="aligncenter" width="750"]
Custom side wall absorber / diffusers. These were designed to manage early reflected energy from the Avantgarde horns, and include 1D and 2D scattering as well as hybrid absorption / diffusion.[/caption]
Hybrid absorber / diffuser panels, specified to reduce the speaker boundary interference cancellation
from the front wall, were mounted to roller tracks such that they could be moved to the optimal location for stereo listening, and then rolled back to expose the left / center / right speakers for home theater usage.
We think the room turned out looking great, with the custom side wall acoustic treatment being a particular highlight of the build.
[caption id="attachment_4343" align="aligncenter" width="750"]
Audiophile listening room acoustics - tuned bass traps and movable speaker boundary interference hybrid absorber / diffusers.[/caption]
[caption id="attachment_4344" align="aligncenter" width="750"]
Rear of listening room showing ceiling mounted QRD type diffusers and hybrid absorber / diffusers (large flat panels behind projector).[/caption]
[caption id="attachment_4345" align="aligncenter" width="750"]
Custom side wall 1D + 2D hybrid absorber-diffuser panel.[/caption]
The post-calibration measurements looked good, but JL Audio's ARO did not do what we were hoping in terms of dealing with the 27Hz peak. We advised the client to upgrade to the newer DARO
in the v2 Fathom subwoofers, which works better.
[caption id="attachment_4352" align="aligncenter" width="750"]
Frequency response of both speakers and subs at 1/12th octave resolution after calibration.[/caption]
In the Client's Words...
"Just as a matter of a background, my previous listening room was designed by Rives Audio, and for one reason or another, I could never get the bass right.
Fast forward, we bought a new house with a great size basement space, and I decided to hire Acoustic Frontiers to design a new listening room.
The design called for a complete remodeling: Nyal Mellor from Acoustic Frontiers specified a new sandwiched drywall (tearing down the old one, including the ceiling), additional in-wall insulation, 6 new dedicated electrical lines, hardwood floors, closing some wall openings, acoustic treatments, etc, etc.
But Nyal's involvement didn't just end there....He guided me through many months of additional measurements, placement changes, system adjustments, alternative crossover settings, etc.
And now I have a listening room, where my old system sounds like it never did before. I really have very little to complain about.
The most fascinating part of the process is that every single design feature, placement change, or system setting change that Nyal advised on REMOTELY, never being physically in my room, turned out to be spot on.
At some point I realized that just designing a listening space is only part of the process. The integration of a specific system into a specific space is probably the most important and involved part of it. Nyal's expertise goes far beyond the acoustic space design. He has really deep and accurate understanding of all the aspects of the playback chain.
To sum it up, had I not hired Acoustic Frontiers, I would have never achieved the results I have today, no question about it. Given the very moderate price of the project, hiring Acoustic Frontiers is the best value investment one can ever make when designing a new audiophile listening room. In my humble honest opinion, it's a must!" I.N., Philadephia, US.